|
|
| General Description
The GPS-1010 engine board is a low power and small-size GPS receiver module, which consumes only 30mA in the position fix state. It is designed with a powerful 32-bit RISC processor, and a tiny RF receiver IC.
GPS-1010 supports seven GPIOs and could be customized easily. It could make use of the processor for other applications without adding another micro-processor. Its power consumption would decrease from 30mA to 0.8mA when utilizes ACC pin to enter power saving mode.
The advantages of GPS-1010 are Low Power and High Customization . It is applicable for cost effective timing applications and any customized product that could always be powered.
Applications
• Car and marine navigation
• Vehicle tracking system
• Automatic vehicle location system
• Fleet management
• GPS data logging
• Electronic-mapping application
• Child/elderly/personal locator and security system
• GPS precise timing
• GPS clock and digital camera
Specifications
Accuracy |
Standard Positioning Service (SPS)
WAAS (optional)
Position: 5~ 15m CEP w/o S/A
Velocity: 0.1 m /sec w/o S/A
Time: ±1μ sec(PPS) |
Acquisition |
Cold start: 60 sec (average)
Warm start: 37 sec(average)
Hot start: 10 sec (average) |
Dynamics |
Altitude: max. 18,000m
Velocity: max. 500m /sec
Acceleration: max. 4g |
Sensitivity |
-140~-145dBm |
I/O protocols |
NMEA 0183 Ver. 3.0: GGA,GLL, GSA, GSV, RMC, VTG
YTEC binary |
Coordinate datum |
WGS84(default) |
Data update rate |
1 second |
I/O port rate |
4800 (default), 9600, 19200, 38400, 57600, 115200 |
Power consumption |
35 mA |
Power supply |
5V |
Antenna power |
3.3V ~ 5V |
Backup power |
5V |
RF connector |
MMCX |
Dimension |
24.5(W) x 25.8(L) x12(H) mm |
Operating temp. |
-40°C ~ +85°C
|
|
|
|
|