|
|
| General Description
The GPS-1000 engine board is a low power GPS receiver module, which consumes only 30mA in the position fix state. It is designed with a powerful 32-bit RISC processor and a tiny RF receiver IC. GPS- 1000 supports six GPIOs and could be customized easily. It could make use of the processor for applications development without adding another micro-processor. The advantages of GPS-1000 are Low Power and High Customization. It is applicable for any customized product and cost effective timing applications. |
Applications
• Car and marine navigation
• Vehicle tracking system
• Fleet management
• GPS data logging
• Electronic -mapping application
• Child /elderly/personal locator and security system
• GPS clock and digital camera
Specifications
Accuracy: |
Standard Positioning Service (SPS), WAAS (optional)
Position: 5~ 15m CEP without S/A
Velocity: 0.1 m /sec without S/A
Time: ±1μ sec (pulse per second) |
Acquisition: |
Cold start: 60 sec (average)
Warm start: 37 sec(average)
Hot start: 10 sec (average) |
Dynamics: |
Altitude: max. 18,000m
Velocity: max. 500m /sec
Acceleration: max. 4g |
Sensitivity: |
-145 dBm |
I/O protocols: |
NMEA 0183 Ver. 3.0: GGA,GLL, GSA, GSV, RMC, VTG
YTEC binary |
Coordinate datum: |
WGS84 (default) |
Data update rate: |
1 second |
I/O port rate: |
4800 (default), 9600, 19200, 38400, 57600, 115200 |
Power consumption: |
30 mA |
Power supply: |
5.0V |
Backup power: |
3.3V |
Antenna power: |
3.3V |
RF connector: |
MCX |
Dimension: |
32(W) x 50(L) x8(H) mm |
Operating temperature: |
-20°C ~ +60°C |
Storage temperature |
-20°C ~ +70°C |
|
|